• <nav id="keucu"></nav>
  • <nav id="keucu"><nav id="keucu"></nav></nav>
  • <nav id="keucu"></nav>
    <nav id="keucu"><strong id="keucu"></strong></nav>
    <menu id="keucu"></menu>
  • PRODUCT

    Liquid sugar and maltose production line

    HOME > PRODUCT

    Liquefaction system

    • PromulgatoYunhao
    • Time2017-11-17
    • Click

        Put the starch milk prepared to the 1st injector and inject steam directly to the starch milk. Make the temperature rise to 110 quickly. After entering the 1st flash evaporator, lower the temperature to 98 and keep it for a certain time. The material, after initial hydrolysis, is with a lower viscidity. The material is then put into the 2nd injector by the pump, its temperature reaching 135 quickly, then it gets to the 2nd flash evaporator. The temperature in the 2nd flash evaporator declines to 95. The DE volume of the material would be between 15 and 20 after its staying in the tubular reactor for 90-120 minutes.

    <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <֩>| <ı> <ı> <ı> <ı> <ı> <ı>